- The ultimate Fluke laser distance meter
- Measures up to 100 m (330 feet)
- Feature-rich meter includes tilt sensor for hard-to-reach measurements, corner angle feature and compass.
Distance Measurement
Typical measuring tolerance 1 : ±1.0 mm 3
Maximum measuring tolerance 2 : ±2.0 mm 3
Range At Leica Target Plate GZM26 : 100 m / 330 ft
Typical range 1 : 80 m / 260 ft
Range at unfavorable condition 4 : 60 m / 195 ft
Smallest unit displayed : 6 / 30 / 60 mm (10 / 50 / 100 m)
Ø Laser point at distances : 6 / 30 / 60 mm (10 / 50 / 100 m)
Tilt Measurement
Measuring tolerance to laser beam 5 ±0.2°
Measuring tolerance to housing 5 ±0.2°
Range 360°
General Specification
Laser class 2
Laser type 635 nm, < 1 mW
Protection class IP54
Automatic laser off After 90 seconds
Automatic power off After 180 seconds
Battery life (2 x AAA) 1.5 V NEDA 24A/IEC LR03 Up to 5,000 measurements
Size (L x W x D) 127 x 56 x 33 mm
Weight (with batteries) 158 g
Temperature range Storage operation -25°C to +70°C (-13°F to +158°F)
-10°C to +50°C (14°F to +122°F)
Calibration cycle Tilt and compass
Maximum altitude 3000 m
Maximum relative humidity 85% at 20°F to 120°F (-7°C to 50°C)
Safety IEC Standard No. 61010-1:2001
EN60825-1:2007 (Class II)
EMC EN 55022:2010
EN 61000-4-3:2010
EN 61000-4-8:2010
KAMI MELAYANI PEMESANAN KESELURUH KOTA-KOTA DI INDONESIA Surabaya, Bali, Sidoarjo, Malang, Semarang, Yogyakarta, Pekalongan, Cirebon, Tangerang, Jakarta, Bandung, Sumatra, Aceh, Lampung, Medan, Riau, Batam, Jambi, Padang, Kalimantan, Samarinda, Pekanbaru, Bengkulu, Makasar, Sulawesi, Irian jaya,Papua, Bangka Belitung, Banten, Jabar, Jateng, Jatim, Ntt, Ntb, Gorontalo, maluku DLL
Selain Ready Stok Laser Distance Meter Fluke 424D di Depok, Kami juga menyediakan produk lainya juga :
